Sunday, November 22, 2026

Column · @jaredsjea416

Pool Surround Cleaning: Tackling Algae Without Damage

Filed by @jaredsjea416

Few things spoil the look of a backyard pool faster than green, black or slimy patches creeping across the paving and decking around it. Algae on a pool surround is more than a cosmetic issue. It creates a genuine slip hazard, stains porous surfaces and, if cleaned the wrong way, can lead to costly damage to pavers, concrete, timber and grout. For Geelong homeowners, understanding how to remove algae safely is the key to protecting both your outdoor area and the people who use it.

Why Algae Thrives Around Geelong Pools

Algae needs moisture, nutrients and some light to establish itself. Pool surrounds supply all three. Splash-out, backwash runoff, wet footprints and shaded corners keep surfaces damp for long periods, while leaf litter, pollen and soil provide the organic material algae feeds on.

Geelong's climate adds to the challenge. Cool, damp winters along Corio Bay and the Bellarine Peninsula keep shaded paving wet for weeks, and sea breezes carry salt and organic particles onto outdoor surfaces. Properties near the Barwon River or with mature trees, such as those in Highton, Belmont and Newtown, often see heavier growth because of extra shade and leaf drop. Warm summer spells can then trigger rapid regrowth when moisture is still present.

Common Types of Growth You May See

Not every dark patch is the same, and identifying what you are dealing with helps you choose the right treatment.

  • Green algae: The most common type, appearing as a slippery green film on shaded or constantly damp paving.
  • Black algae and mould: Dark streaks or spots that anchor into porous surfaces and are harder to remove than green growth.
  • Moss and lichen: Raised, textured growth found in joints, on rough concrete and on limestone or sandstone pavers. Lichen in particular bonds tightly to the surface.
  • Biofilm: A thin, slick layer of bacteria and algae that can form even before visible colour appears, and is often the cause of unexpectedly slippery surfaces.

Why Method Matters: Avoiding Surface Damage

Many surface problems around pools are caused by cleaning rather than by algae itself. Aggressive methods can strip sealers, etch stone, erode grout and leave surfaces rougher, which then holds onto dirt and algae more easily.

Risks of High-Pressure Washing

Pressure cleaning is effective, but too much pressure used too close to the surface can gouge soft concrete, blast sand from between pavers, and leave visible stripes known as tiger marking. Natural stone such as limestone, travertine and bluestone is especially vulnerable. Using a fan tip, keeping the nozzle at a consistent distance and using a surface cleaner attachment on large flat areas all reduce the risk of damage and give a more even result.

Risks of Harsh Chemicals

Strong acids can etch concrete and dissolve the calcium in limestone and some pavers. Undiluted chlorine products can bleach surfaces, corrode metal pool fencing and fixtures, and harm surrounding plants and lawn. Runoff is also a consideration. Cleaning products should never be allowed to enter the pool, where they can upset water balance, or flow into stormwater drains. In Victoria, stormwater drains lead directly to local waterways and Corio Bay without treatment, so wastewater should be directed onto garden beds or lawn where appropriate, or collected where possible.

Safe Algae Removal: A Step-by-Step Approach

The gentlest effective method is usually the best place to start. The process below suits most paved, concrete and tiled pool surrounds.

  1. Prepare the area. Remove furniture, pots and toys. Sweep away leaves and debris, and cover or wet down nearby plants to protect them from cleaning solutions.
  2. Identify the surface. Check whether your surround is sealed or unsealed, and whether it is concrete, stone, pavers, tiles or timber. This determines which products and pressure are safe.
  3. Test a small area. Try your chosen cleaner and method on an inconspicuous patch first and let it dry to check for discolouration or etching.
  4. Apply a suitable treatment. Use a purpose-made outdoor algae remover or a diluted sodium hypochlorite solution as directed on the label. Work in manageable sections and never let the product dry on the surface.
  5. Allow dwell time. Let the product work for the recommended period, typically 10 to 20 minutes, so it breaks down the algae without heavy scrubbing.
  6. Agitate gently. Use a soft to medium bristle broom. Avoid wire brushes, which scratch surfaces and leave rust particles.
  7. Rinse thoroughly. Use low to moderate pressure, or a garden hose, and rinse away from the pool and drains.
  8. Allow to dry completely. Inspect the result and repeat on stubborn spots rather than increasing chemical strength.

Choosing the Right Approach for Your Surface

Concrete and Exposed Aggregate

Concrete tolerates moderate pressure but can be damaged if the surface layer is already worn. Exposed aggregate can lose stones when blasted too hard. Use lower pressure and let the cleaning solution do most of the work.

Natural Stone and Pavers

Limestone, travertine, sandstone and bluestone each react differently to chemicals. Avoid acidic products on calcium-based stone. A neutral or stone-safe cleaner combined with soft brushing is the safest option. Pavers also depend on jointing sand for stability, so keep pressure low around joints and top up sand after cleaning.

Tiles and Grout

Glazed tiles are usually resilient, but grout is porous and can break down under strong pressure or acidic cleaners. Use a soft brush and a mild cleaner, and consider resealing grout lines after deep cleaning.

Timber Decking

Wood is easily damaged by high pressure, which raises the grain and causes splintering near bare feet. A timber-safe cleaner, a soft brush and gentle rinsing are best. Re-oil or re-coat the deck once it is fully dry to restore protection.

Preventing Algae From Returning

Cleaning removes existing growth, but long-term control depends on reducing the conditions algae needs. A few habits make a noticeable difference:

  • Improve drainage so water does not pool on or beside the surround, and check that paving falls away from the pool.
  • Trim overhanging branches to increase sunlight and airflow across shaded areas.
  • Sweep or blow away leaves and organic debris regularly, especially during autumn.
  • Keep pool water properly balanced and sanitised, as splash-out from poorly maintained water can feed growth on surrounds.
  • Apply a quality penetrating sealer to suitable surfaces, which reduces moisture absorption and makes future cleaning easier.
  • Schedule a gentle maintenance wash once or twice a year, rather than waiting for heavy buildup that requires aggressive treatment.

Safety and Environmental Considerations

Algae-covered surfaces are extremely slippery when wet, so take care while cleaning and wear non-slip footwear. When using chemical products, wear gloves, eye protection and suitable clothing, and never mix different cleaning products, as combining chlorine with acids or https://beckettjkrb592.valiantfield.com/posts/the-ultimate-guide-to-removing-stubborn-oil-stains-from-concrete ammonia-based products can release toxic gases. Keep children and pets away from treated areas until they are rinsed and dry.

Increasing attention in 2026 on responsible water use and stormwater protection means it is worth choosing biodegradable, low-impact products where possible and avoiding unnecessary water waste. Many Victorian councils, including the City of Greater Geelong, encourage keeping contaminants out of the stormwater system, so check current local guidance if you are unsure how to dispose of wash water.

When to Call a Professional

DIY cleaning suits light to moderate algae on robust surfaces, but professional help is worth considering in several situations. These include large or heavily stained areas, delicate natural stone, deeply embedded black algae or lichen, previously sealed surfaces that need stripping and resealing, and multi-level or hard-to-reach surrounds. Professionals use calibrated equipment, surface-appropriate treatments and controlled wastewater practices, which reduces the risk of damage and often delivers a more even, longer-lasting result.

When choosing a Geelong cleaning provider, ask about their experience with your specific surface type, how they protect the pool and plants, how they manage wastewater, and whether they offer sealing or follow-up maintenance advice. Public liability insurance is also a sensible requirement.

Final Thoughts

Keeping a pool surround clean is about balancing effectiveness with care. By identifying the type of growth, matching the method to your surface, using the gentlest effective treatment and addressing moisture and shade, you can remove algae without causing damage and keep your pool area safe, attractive and ready to enjoy throughout the Geelong year.

Geelong Pressure Cleaning Pros

(03) 8657 4277

— 30 —